500L beer conical fermenter

PRODUCTS

Get Quotation Now!

  • We supply fermenters, brite tanks and single wall serving tanks ranging in capacity from 1 barrel to 150 barrels. Our quality standard begins with top shelf raw materials, continues with excellent workmanship and ends with rigorous testing. We have installed tanks from coast-to-coast and passes the careful structural engineering scrutiny. 

    Fermenter is also called CCT (Cylindrical Conical Tank), FV (Fermentation Vessel), primary fermentor or unitank as they are used both for fermenting and lagering. Fermenting is the process during which the yeast transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting. 

    Stainless steel fermenter can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as pressure relief valve, CIP cleaning jet, sanitary sample valve, manhole,etc. The design of fermenter is based on our vast beer knowledge and especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the same vessel is very important. When calculating your fermenting and lagering capacity and configuration, sufficient time for fermenting and lagering to produce quality beers must be taken into consideration. 

    Fermentation System

    -Usage: fermentation, maturation and storage

    1-Domed head and conical bottom

    2-Material: SUS 304, inner thickness 3mm, outer thickness1.5mm, Insulation: PU=80mm

    3-Top manway

    4-Cone bottom, 60 degree

    5-Pressure gauge

    6-Safety/vacuum valve

    7-Working pressure: 0.15Mpa

    8-Testing pressure: 0.3Mpa

    9-Cooling jackets on both cylinder and cone

    10-Inside 360 rotating CIP ball

    11. Rotating Racking arm

    12-Thermowell, 10mm

    13-Temperature sensor, Model: PT100

    14-Wort piping and butterfly valves, ø32mm

    15-Drainage piping and butterfly valve, ø38mm

    16-3 or 4 legs with adjustable bolts

    -carbonation stone (optional)

    - dry hops port (optional)  

    Specifications of 500L fermentation tanks: 

    Item

    Introduction

    Volume

    500L

    Dimention

    960*2350mm

    Material

    Stainless steel 304

    Insulation

    Polyurethane, TH: 80mm

    Fermentation tank

    Glycol jacket: Dimpled jacket on the cone and sideOr single wall with jacketed,or single layer fermentor.

    Head

    Double or single dish head on the top

    Accessories

    Sample valve, pressure gauge, solenoid valve, pressure relief valve, racking arm, CIP arm and Blow off arm, dry hops port and so on.



    1

    Total capacity

    680L

    2

    Effective capacity

    500L

    3

    Size

    D960*H2370mm

    4

    Weight

    243kg

    5

    Material

    SUS304

    6

    Exterior/Interior shell

    2mm/3mm

    7

    Insulation material

    PU 80mm

    8

    Top type

    Dished head

    9

    Manhole type

    Top center

    10

    Manhole size

    350mm

    11

    Inner cone

    60 degree

    12

    CIP pipe diameter

    Φ32

    13

    CIP ball(1)

    360º Rotating spray ball

    14

    Temperature sense

    PT100 (inlet G1/2)

    15

    Thermowell diameter

    Φ10

    16

    Inner polishing

    0.2-0.4micron

    17

    Design pressure

    0.2Mpa

    18

    Cooling type

    Dimple cooling jacket

    19

    Cooling area

    2m2

    20

    Jacket inlet

    G1/2

    21

    Jacket outlet

    G1/2

    22

    Pressure control

    Pressure relief valve

    23

    Pressure gauge

    1pc

    24

    Rotating racking arm

    1pc

    25

    Sample port

    Φ38

    26

    Drain outlet

    Φ38

    27

    Safety valve (PVRV)

    Φ51


Message

Products Recommended